Jabsco Accumulator Tank 1L w/ Membrane

Jabsco's accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, such as Jabsco pressure pumps as found in boats, RV's, motor caravans, coaches and similar applications. The accumulator tank smooths water flow and reduces on/off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system.

The even flow of water gives better control of hot water temperature, especially noticeable with instantaneous gas water heaters and with showers. The reduced on/off cycling reduces noise from the pump motor, and from shock pressures (pipe hammer). It also reduces battery drain, and gives longer pump life.

Key Features:
Better temperature control.
Compact size for small pressure systems (typically 1-2 outlets).
Longer pump life.
Lower battery drain.
Internal bladder.
Plastic vessel with internal membrance - can be mounted in any attitude.
Quieter water system.
Smoother and more even flow.
Simply fitted to new or existing systems.

Specifications:
Connections: For 13mm (1/2") bore hose or threaded ports. Supplied with 2 snap-in connectors for 13mm (1/2") bore hose.
Output: Volume: Nominal 1 litre, working capacity up to approximately 0.5 litres.
Weight: 0.80kg.