Raymarine EV-100 Power Pilot

Ideal for single engine outboards, this boat autopilot is suitable for smaller powerboats with hydraulic steering. EV-100 delivers precision autopilot control using the intelligent EV-1 sensor core and the ACU-100 actuator control unit. The system uses a .5 litre hydraulic autopilot pump. This pump is compatible with outboard hydraulic steering cylinder capacities between 50cc - 110cc.

Furthermore, the EV-100 Power Pilot System is compatible with a P70Rs autopilot control head, or you can choose a system without a control head and use a Raymarine Axiom chartplotter for complete autopilot control. The EV-1 sensor core is an intelligent 9-axis heading sensor that uses aerospace guidance technology to adapt and evolve to changing sea conditions and vessel dynamics.

Exclusive Raymarine Hydro-Balance technology adjusts for elasticity in the hydraulic steering system and compensates automatically to prevent steering oscillation, resulting in precise course-keeping and no drive-unit hunting.

Requires no complicated setup or autopilot calibration.

What's In The Box?

1. ACU unit.
2. Documentation.
3. Screws (pan head type).
4. SeaTalkng spur to bare wires cable 1 m (3.3 ft).

Technical Specifications:

Physical:
Dimensions (H x W x D): 140 x 180 x 52mm.
Weight: 0.6kg.

Power:
Power Consumption (standby): 300 mA (12V).
Nominal Supply Voltage: 12V dc.
Operating Voltage Range: 10.8V dc to 15.6V dc.
LEN (NMEA 2000 Load Equivalency Number): 1.

Environmental:
Relative humidity: Max. 93%.
Waterproof Rating: Connector Panel: IPx2, Drive electronics: IPx6.
Storage Temperature: -30C to +70C.
Operating Temperature: -20C to +55C.

Output:
Drive Current Output: Maximum continuous 7A at supply voltage.