Hempel’s Prop Primer is best used as a primer for antifouling on propellers, outboard engines, drive units and small patches on yachts. The primer is easy to apply and dries quickly. Two coats of the spray are recommended, and you can find out how to apply the primer in the FAQ’s section down below. When application is complete, the primer will show a good flat finish.
We've written up a few frequently asked questions that are asked in store for a little extra guidance.
Application is via spray can. Before applying, shake the can vigorously in a vertical position until the agitator ball is heard, then carry on shaking for a further two minutes. Stand 20-30cm back from the surface you are spraying and continue to shake the can occasionally during use. A minimum of two coats are recommended.
When applied at 20C – One hour, at 10C – two hours.
At 20C, 20 minutes. At 10C, 40 minutes. Drying times double at a drop of 10C and half at a rise of 10C.
1.75 metres from a 500ml can.
It is recommended that the substance is applied at a minimum temperature of 5C.
A spray primer suitable for a wide range of appilcations.
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.Register