International Toplac contains silicone alkyd technology which provides a high-gloss shine and rich colour that will not lose gloss over time.
*Colour 991 is Mauritius Blue.
How can International Toplac be applied?
It can be applied with a brush, roller or conventional spray, although spray is recommended for professional use only. 2-3 coats are recommended however only one is required if you are just doing a touch up. Application late in the evening is not recommended as condensation can cause a loss of gloss.
How long should I wait in-between coats?
If applied at 5C – Minimum of 24 hours with a maximum of four days.
15C - Minimum of 16 hours with a maximum of three days.
23C – Minimum of 8 hours with a maximum of two days.
35C – Minimum of 6 hours with a maximum of one day.
How long does Toplac take to become touch dry?
If applied at 5C – 6 hours.
15C – 3 hours.
23C – 2 hours.
35C – 1 hour.
What is Toplac's coverage?
Approximately 12 metres square per litre, 8 metres square per litre with spray.
At what temperature can the formula be applied?
It is recommended that the paint is applied with the temperature between 5C and 35C.
What primer should I use?
Bare wood – Sand smooth with 80-180 and then 280 grade paper before sanding dust by brushing, dusting and wiping. Allow to completely dry before priming with a yacht primer.
Steel – Degrease with a solvent or super cleaner. Clean thoroughly and allow to dry before priming with a yacht primer.
Aluminium – Degrease with a solvent or Yacht Line Super Cleaner. Sand well using 60-120 aluminium grade paper. Clean thoroughly and allow to dry then apply Yacht Primer as soon as possible (within eight hours).
GRP (Glass Reinforced Plastic) – Degrease with solvent or super cleaner. Sand well using 180-220 grade paper. Clean thoroughly and allow to dry. No primer is required so apply Pre-Kote direct to the surface.
Aged/Weathered Gel Coats – Solvent/moisture entrapment after painting is much higher with Aged/Weathered Gel coats due to their potentially porous nature. Entrapment could lead to blistering of the paint film. To reduce this risk, it’s recommended that you apply three coats of Interprotect to seal the gel coat then overcoat this with Perfection undercoat before applying a top coat.
High gloss finish.
International Toplac is an industry leading topcoat that contains silicone alkyd technology, providi..
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.Register