A class B automatic identification system (AIS) transceiver that is designed for use with any multifunction navigation display system. AIS700 not only receives broadcasts from other vessels, but also transmits your own boats information too, helping you be seen on other vessels systems.
Built-in antenna splitter simplifies installation with existing marine VHF radio antenna.
Full transmit and receive AIS for enhanced situational awareness and safety.
Latest SO-TDMA technology for longer range and faster performance.
NMEA2000, NMEA0183, PC (setup & diagnostics) and SeaTalkNG compatible.
Software or hardware switchable Silent Mode for enhanced security when needed.
AIS transceiver.
GNSS antenna including fitted cable 10m (33 ft).
Power/data cable 2m (6.56 ft).
VHF Radio cable 1m (3.28 ft).
DeviceNet to SeaTalkng adaptor cable 1m (3.28 ft).
GNSS antenna gasket.
GNSS antenna pole mount.
AIS transceiver fixings screws (No.8x19) x 4.
GNSS antenna pole mount screws x 3.
Documentation.
GNSS antenna surface mount fixings: Thumbs nuts x 3, Studs (M3x40) x 3.
Environmental:
Relative humidity: Up to 93% @ 40°C (104°F).
Waterproof rating: IPx6, IPx7.
Storage temperature: -20°C to +75°C (-4°F to 167°F).
Operating temperature: -15°C to +55°C (5°F to 131°F).
AIS:
Operating frequency: Transmitting: 156.0MHz to 162.025 MHz, Receiving: 156.0MHz to 174.0 MH.
Class: B (transceiver).
AIS performance: 5W SOTDMA.
Channel spacing: 25 kHz.
Receiver Quantity: 2.
Transmitter Quantity: 1.
Physical:
VHF antenna connection: SO-239 co-axial.
VHF radio connector type: SO-239 co-axial.
NMEA 0183 connection: Port 1 (MFD connection): HS (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate, Port 2 (Instrument connection: (IEC 61162-1) compliant, bi-directional, RS422 levels, 4 wire interface (differential signalling), configurable baud rate.
USB connection: Micro-B.
Dimensions: Height: 132.55 mm (5.22 in), Width: 171.65 mm (4.81 in), Depth: 57 mm (2.24 in).
NMEA 2000 connection: DeviceNet connector.
Silent mode switch connection: Bare-ended wires x 2.
GNSS antenna connector type: 50Ω TNC co-axial.
GNSS (GPS):
GNSS compatibility: GPS, GLONASS.
Cold start acquisition: 26 seconds (nominal).
Channels: 72.
Power:
Operating voltage range: 9.6 V dc to 31.2 V dc.
Power consumption: 3 W.
Fuse rating: 3 A.
Peak current @ 12 V dc: 2.5 A.
Nominal supply voltage: 12 V dc / 24 V dc.
Peak current @ 24 V dc: 1.25 A.
LEN (NMEA 2000 Load Equivalency Number): 1.
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.
RegisterYou have no items in your shopping cart