You have no items in your shopping cart
Rule LP900S 12v LoPro Automatic Submersible Bilge Pump
New in 2016, the LP900S automatic bilge pump is one of our most favourite bilge pumps on the market.
Small and Mighty
At just 237mm long and 59mm in diameter this Rule automatic bilge pump can be mounted either vertically or horizontally and brings power to tight spaces with a pump rate of 56 litres/minute (12.5 gallons/minute). It truly is an excellent choie for small to medium sized boats, particularly where traditional shaped bilge pumps cannot fit.
The LP900S Rule Automatic Bilge Pump has a fully rotating, multi directional outlet that swivels as required, with built-in non-return valve to ensure water isn't pumped up through the hose and runs back down into the bilge as soon as the pump stops.
The LP900S has a choice of outlet sizes included in the pack, to suit your existing hose size installation, being 19mm (3/4"), 25mm (1") or 28mm (1 1/8").
Choice of Operating Modes
Another excellent feature on the Rule LP900S is the three operating modes:
- High Water Mode - The pump starts when the water level reaches 50mm (2").
- Low Water Mode - Turn the motor cartridge by 180 degrees and the sensor is at 33mm (1.3").
- Full Electronic Timer Mode - The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone. This mode is particularly beneficial when you want the peace of mind that the pump will check for water every 2.5 minutes, as opposed to waiting until water reaches the magentic sensor.
Connection Sizes: 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose. The pack comes with these 3 size adapters.
Dimensions: 237mm long, 59mm diameter
Voltage: 12v DC
Current Draw: 4 amps
Fuse Size: 7.5 amp
Output: Up to 56 litres/minute (12.5 gallons/minute). Maximum recommended discharge head 3m.