Attwood 3" Turbo In-Line Bilge Blower 12V 75mm Hose

With its Patented in-line design, the Attwood 3" In-Line Bilge Blower provides ventilation at 4 Cubic Metres/minute for engine compartments, galleys, bilges, and heads. The mounting feet allow for both vertical or horizontal installation in confined spaces.

Features and Specifications:

-CE certified.

-16-gauge, tinned and caulked copper wire leads.

-Nickel-plated motor can for corrosion resistance.

-Stiffening ribs to reduce housing distortion.

-Motor cap to seal wires and motor for water resistance.

-Voltage: 12volt

-CFM Open Flow: 145

-CFM in system: 100

-Amp Draw: 3.1 amps

-Recommended Fuse Size: 4 amp

-Hose required: 75mm

-4.0 Cu.m/min