Hempel's Eco Powerprop is ideal as a coating for propellers, out-drives and stern gear.
Once applied, the coating will make it difficult for fouling to fully attach, therefore making it easy to dislodge and remove when cleaning.
We've written up a few frequently asked questions that are asked in store for a little extra guidance.
Application is via a spray can. Hold the can in a vertical position and shake vigorously until you can hear the agitator ball, then shake for a further two minutes. Spray approximately 20-30cm away from the surface and continue to shake during application.
A minimum of four coats are recommended, these coats should be 25 micron dry film thickness each. Do not apply in direct sunlight.
A minimum of 40 minutes if applied at 20C, 60 minutes at 10C.
1.3 metres square per litre.
It's recommended that you wait a minimum of 24 hours with a maximum of 1 month if applied at 20C.
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.Register