Suitable for use above or below the waterline, TruDesign composite ball valves are moulded from a glass-reinforced nylon composite that provides exceptional strength, stiffness, toughness and dimensional stability. In addition, the ball and sealing rings utilise a PTFE polymer that provides a smooth action and continuous ease of operation over many years. TruDesign marine valves not only weigh significantly less than metallic ball valves, but also eliminate the corrosion and electrical bonding problems associated with them.Â
TruDesign skin fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
Can be locked to comply with toilet waste outlet standards.
Immune to corrosion and electrolysis.
Impervious to diesel, petrol and antifouling paints.
Individually leak and pressure tested.
Large operating temperature range of -40C to +110C.
Manufactured from a glass-reinforced nylon composite that is high strength and light weight.
OPEN/CLOSED positions marked for easy identification.
Removable handles to assist installation.
UV resistant, so will not degrade or discolour with green film, as found with similar bronze fittings.
Please refer to the diagram in the product images.
Size | Length | Height | Width | Minimum Internal | Lever Handle | ||
A | B | C | D | E | F | G | H |
1/2" | 25mm | 102mm | 88mm | 61mm | 20mm | 32mm | 93mm |
3/4" | 22mm | 102mm | 88mm | 61mm | 20mm | 32mm | 93mm |
1" | 22mm | 102mm | 8mm | 61mm | 20mm | 32mm | 93mm |
1 1/4" | 32mm | 122mm | 102mm | 76mm | 32mm | 38mm | 108mm |
1 1/2" | 32mm | 122mm | 102mm | 76mm | 32mm | 38mm | 108mm |
2" | 32mm | 141mm | 124mm | 99mm | 48mm | 38mm | 108mm |
3" | 46mm | 205mm | 180mm | 153mm | 75mm | 50mm | 160mm |
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.
RegisterYou have no items in your shopping cart